Home
» Miscellaneous Brake Components
Product ID 3580750-1R
1971 - 1975 11" Drum Parking Brake Strut Lever Set

Price$28.00
Product ID 2260788R
Brake Shoe Guide Plate
Nice reproduction of the brake shoe guide plate used to secure the drum brake shoes on all 1962-76 11" drum brake equipped cars.  Made from the correct gauge steel and clear zinc plated for original appearance and corrosion resistance.  Two required per drum brake axle.
 
Reference Chrysler part number 2260788.
Price$10.00
Product ID 2944722-3R
Caliper Pin Positioner Kit

This pin positioner kit is correct for servicing two Kelsey Hayes calipers used on 1970 B & E-Body and 1969-70 C-Body vehicles.  Kit includes two left hand and two right hand pin positioners.  Positioners are formed from the correct gauge steel in the correct flat style, embossed with “UP” and arrow marks, and are yellow cadmium plated as original.  Long extinct, a must have item for the proper restoration of your 1970 vehicle!  Reference Chrysler part numbers 2944722-3.

Price$70.00
Product ID 3461770-1R
Caliper Pin Positioner Kit

This pin positioner kit is correct for servicing two Kelsey Hayes calipers used on 1971-72 B, C & E-Body vehicles.  Kit includes two left hand and two right hand pin positioners.  Positioners are formed from the correct gauge steel with bushing relief dimples, embossed with proper “UP” and arrow marks, and are clear zinc plated as original.  Reference Chrysler part numbers 3461770-1.

Price$65.00
Product ID RSBB121
 

1962-1964 DUAL MASTER CONVERSION BRAKE BLOCK

 

Price$50.00
Product ID RSBB123
 

1965-1966 DUAL MASTER CONVERSION BRAKE BLOCK

 

Price$50.00
Product ID 1613416R
Front Wheel Grease Cap

A very nice reproduction of the front wheel grease cap used on all 10” and 11” front wheel hubs from 1957-72 except Imperial.  Used on both drum and disc brake applications.  Formed from the correct gauge steel with the shape of an original part. Plated as original to prevent corrosion.  Two required per vehicle.  Reference Chrysler P/N 1613416.

Price$14.95
Product ID 2260800-1
Parking Brake Actuator Lever Set
Parking brake actuator levers for 1964-71 applications with 11" rear drum brakes.  Set includes pressed in pivot pins, a pair of zinc plated C-clips, and a pair of zinc plated wave washers.  Reference Chrysler part number 2260800-1.
 
One set required per vehicle.
Price$55.00
Product ID 2534926R
Parking Brake Cable Clamp

Nice reproduction of the clamp used to secure the upper parking brake cable to the parking brake actuator on 1966-70 B-Body, 1970 E-Body, and 1970-75 A-Body cars.  Formed from correct gauge steel and includes 1/4-20 hex head mounting bolt & correct yellow zinc hex coni SEMS nut.  Reference Chrysler part number 2534926.

Price$21.00
Product ID 2071094
Parking Brake Cable Rear Connectors - Pair

The ONLY 100% accurate reproduction available on the market of the parking brake cable rear connector.  Made from the correct gauge ROUND EDGE material and clear zinc plated as original.  Two used per car on 1962 A & B-Body, 1963-64 A, B, & C-Body, 1965 A & B-Body, 1966 A-Body, and 1971-74 A, B, & E-Body applications.  Sold as a pair.  Reference Chrysler part  number 2071094.

Price$20.00
Product ID 2533892-3R
Parking Brake Strut Lever Set
Parking brake strut levers for 1965-70 11" rear drum brake applications for all body styles.  Set includes pair of strut lever springs.  Right side lever stamped with "R".  Reference Chrysler part number 2533892-3.
 
One set required per vehicle.
Price$35.00
Product ID 1944092
Power Brake Vacuum Hose Fitting

Excellent reproduction of the vacuum fitting found on the intake manifold for power brake applications with 1/8” auxiliary connection.  Machined with the correct tall hex base with 3/8” NPT threads, formed and bubble flared steel tube is silver soldered into place, and then silver cadmium plated for original appearance.  Used on power brake vehicles (except 1968-69 Charger) that are equipped with either an Air Grabber hood or A/C.  Also used on 1960-65 vehicles requiring vacuum for the heater controls.  Single 1/8” auxiliary port.  Reference part number 1944092.  Primary applications listed but others may exist.

Price$45.00
Product ID 1944154R
Power Brake Vacuum Hose Fitting

Price$12.00
Product ID 1948838
Power Brake Vacuum Hose Fitting

Excellent reproduction of the vacuum fitting found on the intake manifold for power brake applications with 1/8" and 1/4” auxiliary connections.  Machined with the correct tall hex base with 3/8” NPT threads, formed and bubble flared steel tubes are silver soldered into place, and then silver cadmium plated for original appearance.  Used on 1968-69 Chargers that are equipped with A/C.  Dual 1/8” and 1/4” auxiliary ports.  Reference part number 1948838.   

Price$54.00
Product ID 2405466
Power Brake Vacuum Hose Fitting

Excellent reproduction of the vacuum fitting found on the intake manifold for power brake applications with 1/4” auxiliary connection.  Machined with the correct tall hex base with 3/8” NPT threads, formed and bubble flared steel tube is silver soldered into place, and then silver cadmium plated for original appearance.  Used on 1968-69 Chargers and Daytona with power brakes without Hemi engine.  Also used on Superbird with all engines and all 1968-69 Hemi equipped vehicles except Charger/Daytona.  Single 1/4” auxiliary port.  Reference part number 2405466.   Primary applications listed but others may exist.

Price$45.00
Product ID 2944031
Power Brake Vacuum Hose Fitting

Excellent reproduction of the vacuum fitting found on the intake manifold for power brake applications with dual 1/4” auxiliary connections.  Machined with the correct tall hex base with 3/8” NPT threads, formed and bubble flared steel tubes are silver soldered into place, and then silver cadmium plated for original appearance.  Used on 1968-69 Chargers and Daytona with power brakes and Hemi engine.  Dual 1/4” auxiliary ports.  Reference part number 2944031.   Primary applications listed but others may exist.

Price$54.00