Home
» E-BODY
» All Products
Product ID P4120702
We're Direct Connected Decal
We're Direct Connected Decal

MOPAR PERFORMANCE/DIRECT CONNECTION P4120702 "WE'RE DIRECT CONNECTED" DECAL

Price$10.00
Product ID WC68(2)
 
WHEEL CYLINDERS 1970-1972

1970-72 Wheel Cylinder, Left Front, 1-3/16".

REPLACES 3420995

Price$28.00
Product ID WC69(2)
 
WHEEL CYLINDERS 1970-1972

1970-72 Wheel Cylinder, Right Front, 1-3/16".

REPLACES 3420996

Price$28.00
Product ID WC73(2)
 
WHEEL CYLINDERS 1970-1972

1970-72 Wheel Cylinder, Rear 10" & 11" Brakes, 15/16". 2881606

 

Price$28.00
Product ID WC70
 
WHEEL CYLINDERS 1970-1974
1970-74 Wheel Cylinders, Rear 9" Brakes, 15/16".
Price$28.00
Product ID 270229
 
WHEEL OPENING MOLDING SCREW KIT

Wheel opening molding screw kit. Contains 40 total screws enough to do all four (4) moldings.

P/N: 6028674

Price$15.00
Product ID WCH1
 
WINDOW CRANK HANDLE KIT A,B,E & C BODY

Window Crank Handle Kit. Includes 1 Pair of Window Cranks, Thin Washers & Screws. Fits A-, B-, C- & E-Body, Except for 1970-74 Cuda & Challenger Rear.

Price$55.00
Product ID WCH2
 
WINDOW CRANK HANDLE KIT CHALLENGER REAR
Window Crank Handle Kit. Includes 1 Pair Window Cranks 1/4" Thick Washer & Screws. Fits 1970-74 Challenger Rear.
Price$55.00
Product ID WCH3
 
WINDOW CRANK HANDLE KIT CUDA REAR

Window Crank Handle Kit. Includes 1 Pair Window Cranks, 1/2" Thick Textured Washers & Screws. Fits 1970-74 Cuda Rear.

Price$58.00
Product ID 280087
WINDOW DOOR HARDWARE KIT 73-74 E BODY
WINDOW DOOR HARDWARE KIT 73-74 E BODY

Door Window Hardware Kit for 1973-74 E-Body.

Price$68.00
Product ID 6000305
Window Regulator Arm Clip
Window Regulator Arm Clip

67-74 All Cars Window Regulator Arm Clip. Sold As Each. MOPAR #6000305

Price$4.95
Product ID 280089
Window Retainer
Window Retainer

67-72 A Body & 73-74 E Body Window Retainer. Sold As Each

Price$12.00
Product ID 280088
Window Roller
Window Roller

73-74 E Body Window Roller 

Price$12.00
Product ID AX41T
WIRE RETAINING CLIP - MANUAL TRANS
WIRE RETAINING CLIP - MANUAL TRANS
Wire Retaining Clip for Manual Transmission Side Cover for the Reverse Light Switch Wire on 3- & 4-Speed Transmissions. Mounts Under Side Cover Retaining Bolts at Rear Top & Rear Upper Locations. Zinc Plated Correct Gauge Steel & Thermo-Plastic Coated for Proper Appearance. Two Wire Retaining Clips Required Per Transmission.
Price$7.00
Product ID 2401910R
Z-BAR BALL STUD BEARING RETAINING WIRE
Z-BAR BALL STUD BEARING RETAINING WIRE

Price$8.00
Product ID 938(1)
Z-BAR BALL STUD BEARINGS
Z-BAR BALL STUD BEARINGS

Injection Molded in Delrin to Increase the Life & Reduce Friction, Yet Provides Correct Appearance of Nylon. Each Pair Fits Over the Z-Bar Ball Studs & Into the Z-Bar Tube. Two Pair are Required. Reference Chrysler # 2265938

Price$5.00
Product ID 2265942R
Z-BAR BALL STUD RUBBER SEAL
Z-BAR BALL STUD RUBBER SEAL

Injection Molded in Silicone Rubber for Higher Temperature Resistance & Long Life. Ball Side Lettering Shows Which Direction the Seal is to Be Installed. Keeps Dirt from the Ball Stud Bearings. Two are Required. Reference Chrysler # 2265942

Price$6.00
Product ID 2405086R
Z-BAR LINKAGE NYLON WEAR WASHER
Z-BAR LINKAGE NYLON WEAR WASHER

Price$3.00
Product ID 2405085R
Z-BAR LINKAGE SPRING CLIP
Z-BAR LINKAGE SPRING CLIP
(3) required per car
Spring steel clip that fits over the pivot stud of each end of the Z-Bar, and the clutch pedal linkage stud.  Secures the clutch actuator rods to the Z-Bar and clutch pedal linkage.  Reference Chrysler part number 2405085.
Price$4.95
« ...505152 Next »